Technical Specifications of NSN
Body Material:
Any acceptable
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.7350 inches
Flange Diameter:
Between 0.7470 inches and 0.7500 inches
Flange Thickness:
Between 0.0590 inches and 0.0650 inches
Undercut Diameter:
0.6910 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.1242 inches single shaft and 0.1247 inches single shaft
Shaft Length:
0.4220 inches single shaft and 0.4520 inches single shaft
Securing Hole Quantity:
3
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
32.5 milliamperes
Stator Input Electrical Power Rating:
74.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
1300.00
Zso Resistance In Ohms:
94.00
Zrs Resistance In Ohms:
1385.00
Rotor Dc Resistance In Ohms:
540.00
Stator Dc Resistance In Ohms:
85.00
Phase Shift Angle In Deg:
16.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
40.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Actuator Friction Torque At Minus 55 Deg Celsius:
0.8 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
0.4 centimeter-grams
Pilot Length:
Between 0.0430 inches and 0.0470 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Mounting Facility Screw Thread Series Designator:
Unf
Plus J Zro Reactance In Ohms:
1975.00
Shaft Slot Depth:
0.0200 inches single shaft and 0.0300 inches single shaft
Shaft Slot Width:
0.0150 inches single shaft and 0.0250 inches single shaft
Plus J Zrs Reactance In Ohms:
675.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0750 inches
Mounting Facility Screw Thread Diameter:
0.060 inches
Transformation Ratio:
2.203 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.5910 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
